Availability:
     Online     , CTRL-U

  Quick Help:
     Display Congen

  Description:
    This command displays the Congen information.

  Input Parameters:
    None

  Output Data:


    If an error occurred, the following information will be displayed.
    
          "DiagError aaaaaaaa"
    
       where
    
          aaaaaaaa is the Diagnostic Error Code
    
    If no error occurred, the Congen data will be displayed as follows:
    
          "       00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F"
          " 0000: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX"
                      .
                      .
                      .
          " YYYY: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX"
    
          "           DriveNativeInfo Mode Page"
          "             DriveNativeInfo Group"
          "Byte:ZZZZ:       sssssssssssssssssssssssss"
                      .
                      .
                      .
          "Byte:WWWW:       sssssssssssssssssssssssss"
    
       where:
               XX = ASCII hex data
             YYYY = Ending byte offset of last row of data
             ZZZZ = Byte offset of beginning of Drive Native Info
             WWWW = Byte offset of ending of Drive Native Info
           ss..ss = Strings representing Congen information
    
  Revision History:

    0001.0000   Initial revision.
    0011.0000   Combined the PSG Diagnostic Error Codes (PSGDEC) and the Diagnostic External
                Test Service Error Codes (DETSEC) into a single set of Diagnostic Error Codes
                (DiagError).