Availability:
     Online     , '.'

  Quick Help:
     Display Active Status

  Description:
    The Display Active Status command displays the drives's active status information.

  Input Parameters:
    None

  Output Data:


    If an error occurred, the following information will be displayed.
    
          "DiagError aaaaaaaa"
    
       where
    
          aaaaaaaa is the Diagnostic Error Code
    
    If no error occurred and the current Read/Write Sector Address is in the User Area,
    the following information will be displayed.
    
          "Current User LBA cccccccc LLL CHS dddddd.e.ffff PLP CHS gggggg.h.iiii"
          "R/W Status j R/W Error kkkkkkkk lll...l"
    
    If no error occurred and the current Read/Write Sector Address is in the User Area,
    the following information will be displayed.
    
          "Current System LBA cccccccc LLL CHS dddddd.e.ffff PLP CHS gggggg.h.iiii"
          "R/W Status j R/W Error kkkkkkkk lll...l"
    
       where
    
          cccccccc is the current Read/Write Disk Logical Block Address
    
          dddddd is the current Read/Write Logical Cylinder Address
    
          e is the current Read/Write Logical Head Address
    
          ffff is the current Read/Write Logical Sector Address
    
          gggggg is the current Read/Write Physical Cylinder Address
    
          h is the current Read/Write Logical Head Address
    
          iiii is the current Physical Sector Address
    
          j is the sense status returned by the R/W subsystem for the last operation
    
          kkkkkkkk is the error code returned by the R/W subsystem for the last operation
    
          lll...l is a string that indicates whether or not the drive is currently ready
    
  Revision History:

    0001.0000   Initial revision.
    0011.0000   Combined the PSG Diagnostic Error Codes (PSGDEC) and the Diagnostic External
                Test Service Error Codes (DETSEC) into a single set of Diagnostic Error Codes
                (DiagError).