Availability:
     Level L    , 'd'

  Quick Help:
     Delete Log File, d[Log]

  Description:
    This command deletes the specified log file.

  Input Parameters:

    0 - Log Number.
    
        This parameter specifies the number of the log to be deleted.
    
        The following are the default or special log files supported by the diagnostics:
        0x0000: ACTIVE_ERROR_LOG_ID - Indicates the currently active error log.
        0x0001: ACTIVE_ASCII_LOG_ID - Indicates the currently active ASCII log.
        0x0002: ACTIVE_RW_STATISTICS_LOG_ID - Indicates the currently active R/W statistics log.
        0xFFFA: QMON_STATISTICS_LOG_ID - Indicates QMON error map log.
        0xFFFB: SYMBOL_ERROR_MAP_LOG_ID - Indicates symbol error map log.
        0xFFFC: DEFAULT_ERROR_LOG_ID - Indicates the default error log.
        0xFFFD: DEFAULT_RW_STATISTICS_LOG_ID - Indicates the default R/W statistics log.
        0xFFFE: TEMPORARY_LOG_ID - This log is used internally for copy operations.
        0xFFFF: INVALID_LOG_ID - Indicates an invalid log.
    
          Type:    Unsigned 16-bit value
    
          Range:   0 to 0xFFFF
    
          Default: None
    
  Output Data:

    If an error occurred, the following information will be displayed.
    
          "DiagError aaaaaaaa"
    
       where
    
          aaaaaaaa is the Diagnostic Error Code
    
  Revision History:

    0001.0000   Initial revision.
    0011.0000   Combined the PSG Diagnostic Error Codes (PSGDEC) and the Diagnostic External
                Test Service Error Codes (DETSEC) into a single set of Diagnostic Error Codes
                (DiagError).