Availability:
     Level L    , 'C'

  Quick Help:
     Copy Log File, C[SrcLog],[DestLog],[AppendOpt]

  Description:
    This command copies the specified source log file to the specified destination log file.

  Input Parameters:

    0 - Source Log Number.
    
        This parameter specifies the number of the log that is the source of the data to
        be copied.
    
        The following are the default or special log files supported by the diagnostics:
        0x0000: ACTIVE_ERROR_LOG_ID - Indicates the currently active error log.
        0x0001: ACTIVE_ASCII_LOG_ID - Indicates the currently active ASCII log.
        0x0002: ACTIVE_RW_STATISTICS_LOG_ID - Indicates the currently active R/W statistics log.
        0xFFFA: QMON_STATISTICS_LOG_ID - Indicates QMON error map log.
        0xFFFB: SYMBOL_ERROR_MAP_LOG_ID - Indicates symbol error map log.
        0xFFFC: DEFAULT_ERROR_LOG_ID - Indicates the default error log.
        0xFFFD: DEFAULT_RW_STATISTICS_LOG_ID - Indicates the default R/W statistics log.
        0xFFFE: TEMPORARY_LOG_ID - This log is used internally for copy operations.
        0xFFFF: INVALID_LOG_ID - Indicates an invalid log.
    
          Type:    Unsigned 16-bit value
    
          Range:   0 to 0xFFFF
    
          Default: None
    
    1 - Destination Log Number.
    
        This parameter specifies the number of the log that is the destination of the data
        to  be copied.
    
          Type:    Unsigned 16-bit value
    
          Range:   0 to 0xFFFF
    
          Default: None
    
    2 - Append Source Log to Destination Log.
    
        If any value is entered for this parameter, the specified source log will be
        appended to the end of the specified destination log.
    
          Type:    Unsigned 16-bit value
    
          Range:   0 to 0xFFFF
    
          Default: None
    
  Output Data:

    If an error occurred, the following information will be displayed.
    
          "DiagError aaaaaaaa"
    
       where
    
          aaaaaaaa is the Diagnostic Error Code
    
  Revision History:

    0001.0000   Initial revision.
    0011.0000   Combined the PSG Diagnostic Error Codes (PSGDEC) and the Diagnostic External
                Test Service Error Codes (DETSEC) into a single set of Diagnostic Error Codes
                (DiagError).