Availability:
     Level G    , 'G'

  Quick Help:
     Display Super Parity RAM, G[StartAddr],[EndAddr]

  Description:
    This command displays the specified segment of the Super Parity RAM.

  Input Parameters:

    0 - Start Address Offset of Super Parity RAM.
    
        This parameter specifies the start address offset of the super parity RAM.
    
          Type:    Unsigned 16-bit value
    
          Range:   0 to 0xffff,
    
          Default: 0
    
    1 - End Address Offset of Super Parity RAM.
    
        This parameter specifies the end address offset of the super parity RAM.
    
          Type:    Unsigned 16-bit value
    
          Range:   0 to 0xffff
    
          Default: 0
    
  Output Data:

    If an error occurred, the following information will be displayed.
    
          "DiagError aaaaaaaa"
    
       where
    
          aaaaaaaa is the Diagnostic Error Code
    
  Revision History:

    0001.0000   Initial revision.
    0011.0000   Combined the PSG Diagnostic Error Codes (PSGDEC) and the Diagnostic External
                Test Service Error Codes (DETSEC) into a single set of Diagnostic Error Codes
                (DiagError).