Availability:
     Level G    , 'C'

  Quick Help:
     Copy Correction Buffer, C[SrcAddr],[DestAddr],[NumSyms]

  Description:
    This command copies the specified segment of the Correction Buffer to another
    place in the same buffer.

  Input Parameters:

    0 - Source Address Offset of Correction Buffer.
    
        This parameter specifies the source address offset of the correction buffer.
    
          Type:    Unsigned 16-bit value
    
          Range:   0 to 0xffff,
    
          Default: 0
    
    1 - Destination Address Offset of Correction Buffer.
    
        This parameter specifies the destination address offset of the correction buffer.
    
          Type:    Unsigned 16-bit value
    
          Range:   0 to 0xffff
    
          Default: 0
    
    2 - Symbol Count of Correction Buffer Units To Be Copied.
    
        This parameter specifies the count of the symbols in the correction buffer
        to be copied.
    
          Type:    Unsigned 16-bit value
    
          Range:   0 to 0xffff
    
          Default: 0
    
  Output Data:

    If an error occurred, the following information will be displayed.
    
          "DiagError aaaaaaaa"
    
       where
    
          aaaaaaaa is the Diagnostic Error Code
    
  Revision History:

    0001.0000   Initial revision.
    0011.0000   Combined the PSG Diagnostic Error Codes (PSGDEC) and the Diagnostic External
                Test Service Error Codes (DETSEC) into a single set of Diagnostic Error Codes
                (DiagError).