Availability:
     Level 7    , 'K'

  Quick Help:
     Set Track Format, K[UserAreaTrkFormatType],[SysAreaTrkFormatType]

  Description:
    This command configures the track layout based on the specified track format type.

  Input Parameters:

    0 - User Partition Track Format Type.
    
        This parameter specifies the track format type to be applied to user
        media partition.
    

             0 = Normal Track Format - multiple sectors per wedge w/ splits
             1 = No Splits Format - multiple sectors per wedge w/o splits
             2 = Single Sector Per Wedge Format
    
          Type:    Unsigned 8-bit value
    
          Range:   0, 1, or 2
    
          Default: 0
    
    1 - System Partition Track Format Type.
    
        This parameter specifies the track format type to be applied to system
        media partition.
    

             0 = Normal Track Format - multiple sectors per wedge w/ splits
             1 = No Splits Format - multiple sectors per wedge w/o splits
             2 = Single Sector Per Wedge Format
    
          Type:    Unsigned 8-bit value
    
          Range:   0, 1, or 2
    
          Default: 0
    
  Output Data:


    If an error occurred, the following information will be displayed.
    
          "DiagError aaaaaaaa"
    
       where
    
          aaaaaaaa is the Diagnostic Error Code
    
    If no error occurred, then the Set Track Format output will be displayed as follows.
    
          "User Media Partition Track Format Type:   aaaaaaaaaaaaaaa"
          "System Media Partition Track Format Type: bbbbbbbbbbbbbbb"
          "Sectors per rev on current track: cccc"
    
       where
    
          aa..aa is a string that represents the track format type (see below).
          bb..bb is a string that represents the track format type (see below).
          cccc   is the number of sectors on the track.
    
       The following are the possible strings used to represent the track format type:
    
          "Multiple Sectors Per Wedge with Splits (Default)."
          "Multiple Sectors Per Wedge without Splits."
          "Single Sector Per Wedge."
    
  Revision History:

    0001.0000   Initial revision.
    0011.0000   Combined the PSG Diagnostic Error Codes (PSGDEC) and the Diagnostic External
                Test Service Error Codes (DETSEC) into a single set of Diagnostic Error Codes
                (DiagError).