Availability:
     Level 7    , 'b'

  Quick Help:
     Erase Track, b[AdjacentTrkCnt],[EraseCntPerTrk],[AcEraseOpt]

  Description:
    This command erases the target track and the specified number of tracks on each side
    of the target track.

  Input Parameters:

    0 - Adjacent Tracks to Erase.
    
        This parameter specifies the number of adjacent tacks on each side of the target
        track to be erased.
    
          Type:    Unsigned 16-bit value
    
          Range:   0 to 0xFFFF
    
          Default: 0
    
    1 - Erase Count per Track.
    
        This parameter specifies the number of times each track should be erased.
    
          Type:    Unsigned 16-bit value
    
          Range:   0 to 0xFFFF
    
          Default: 1
    
    2 - AC Erase Option.
    
        If any value is entered for this parameter, an AC erase will be performed, else a
        DC erase is performed.
    
          Type:    Unsigned 16-bit value
    
          Range:   0 to 0xFFFF
    
          Default: None
    
  Output Data:

    If an error occurred, the following information will be displayed.
    
          "DiagError aaaaaaaa"
    
       where
    
          aaaaaaaa is the Diagnostic Error Code
    
  Revision History:

    0001.0000   Initial revision.
    0011.0000   Combined the PSG Diagnostic Error Codes (PSGDEC) and the Diagnostic External
                Test Service Error Codes (DETSEC) into a single set of Diagnostic Error Codes
                (DiagError).