Availability:
     Level 6    , 'D'

  Quick Help:
     Display Batch File, D[BatchFileNum]

  Description:
    This command displays the contents of the specified Diagnostic Batch File.  A Batch
    File is sequence of ASCII Diagnostic Commands entered by the user via the serial port
    interface.

    The drive's firmware is created with a number of built-in batch files.  Descriptions
    of these built-in batch files are available at the following link:

    Predefined Batch Files

  Input Parameters:

    0 - Batch File Number.
    
        This parameter specifies the number of the Batch File to be displayed.
        
          Type:    Unsigned 8-bit value
    
          Range:   0 t0 0xFF
    
          Default: 0
    
  Output Data:
    Displays the ASCII Serial Port Command sequence contained in the Batch File.

  Revision History:

    0001.0000   Initial revision.
    0011.0000   Combined the PSG Diagnostic Error Codes (PSGDEC) and the Diagnostic External
                Test Service Error Codes (DETSEC) into a single set of Diagnostic Error Codes
                (DiagError).