Availability:
     Level 5    , 'i'

  Quick Help:
     Read Servo Symbol Table at Index, i[Index]

  Description:
    The Read Servo Symbol Table at Index command reads and displays the Servo Symbol Table
    entry at the specified index.

  Input Parameters:

    0 - Servo Symbol Table Index.
    
        This parameter specifies the index of the Servo Symbol Table entry to be read.
    
          Type:    Unsigned 16-bit value
    
          Range:   0 to 0xFFFF
    
          Default: None
    
  Output Data:


    If an error occurred, the following information will be displayed.
    
          "DiagError aaaaaaaa"
    
       where
    
          aaaaaaaa is the Diagnostic Error Code
    
    If no error occurred, the following servo symbol table information will be displayed as
    follows.
    
          "Servo Symbol Table Index cccc Value dddddddd"
    
       where
    
          cccc     is the index of the servo symbol table entry that was read.
    
          dddddddd is the data that was read from the servo symbol table.
    
  Revision History:

    0001.0000   Initial revision.
    0011.0000   Combined the PSG Diagnostic Error Codes (PSGDEC) and the Diagnostic External
                Test Service Error Codes (DETSEC) into a single set of Diagnostic Error Codes
                (DiagError).