Availability:
     Level 4    , 't'

  Quick Help:
     Display / Modify ZAP Table, t[EntryNum],[EntryValue]

  Description:
    This command displays or modifies the RAM ZAP table.

  Input Parameters:

    0 - ZAP Table Entry Number.
    
        This parameter specifies the number of the ZAP Table entry to be modified.
        If this parameter and / or Parameter 1 are not entered, the ZAP table will
        be displayed.
    
          Type:    Unsigned 16-bit value
    
          Range:   0 to 0xFFFF
    
          Default: None
    
    1 - ZAP Table Entry Data.
    
        This parameter specifies the value to be written to the specified ZAP table entry.
        If this parameter and / or Parameter 0 are not entered, the ZAP table will be
        displayed.
    
          Type:    Signed 16-bit value
    
          Range:   0 to 0xFFFF
    
          Default: None
    
  Output Data:


    If an error occurred, the following information will be displayed.
    
          "DiagError aaaaaaaa"
    
       where
    
          aaaaaaaa is the Diagnostic Error Code
    
    If no error occurred, the whole Zap Table will be displayed as follows.
    
          "Row 000 xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx"
          "Row 001 xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx"
            .
            .
            .
    
       where
    
          xxxx is the ZAP data at the specified index position of the ZAP table
    
  Revision History:

    0001.0000   Initial revision.
    0011.0000   Combined the PSG Diagnostic Error Codes (PSGDEC) and the Diagnostic External
                Test Service Error Codes (DETSEC) into a single set of Diagnostic Error Codes
                (DiagError).