Availability:
     Level 1    , 's'

  Quick Help:
     Call SDBP Cmd, s[Parm1],[Parm2],[Parm3]
 
  Description:
    This command will call the SDBP Router.  The input parameters specify the data to be
     sent to the SDBP router, the response of the SDBP router will be printed at the end
     of the call
    
  Input Parameters:
 
      0 - XX
 
       This is the byte value to fill into the SDBP packet.  Each parameter represents
        one byte.  Not entering the parameter will indicate end of the packet.

       Type:    Unsigned 8-bit value

       Range:   0 to 0xFF

       Default: Not entered
 
  Output Data:
 
   If the user did not enter a DETS command then the output data will be
 
          Return Packet:
          aaaa: bb cc dd ee ff gg hh ii jj kk
       
   Where
           aaaa is the offset into the packet ( 16 bytes per line is displayed )
           bb-kk is the binary values in the response packet
 
   If the user specified a DETS command then the output data will be

           Diag Data Type aaaa Rev bb DiagErr cccccccc
           dd dd dd dd .....
           .
           .
   Where
           aaaa is the return DETS data type
           bb   is the revision of the DETS data type
           cccccccc is the error code from the DETS command
           dd   is the data following the DETS command return block

    Example #1:
    To enable the DITS port

       F3 1>s1,0,1,0,8,0,0,0,ff,ff,1,0,9a,32,4f,03
       
       Return Packet:
       0000: 01 00 01 00 10 00 00 00 72 06 2F 00 00 00 00 08
       0010: 03 02 00 01 80 02 00 00

    Example #2:
    To Spin down the drive ( DETS command 0x1B )
 
       F3 1>s7,0,7,0,4,0,0,0,1b,0,1,0
 
       Diag Data Type 0009 Rev 01 DiagErr 00000000
       00 00 00 00 56 36 9F 00 00 00 00 00 00 00 00 00
       00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
       00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
       00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
       00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
       00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
       00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
       00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
       00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
       00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
       00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
       00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
       00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
       00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
       00 00 00 00 00 00 00 00 00 00 00 00

  Revision History:
   1.0 Intial Revision