Availability:
     Level 1    , 'G'
     Level 7    , 'i'

  Quick Help:
     Generic Read/Write Request, G[Parm0],[Parm1],[Parm2],...[Parm9]
     Generic Read/Write Request, i[Parm0],[Parm1],[Parm2],...[Parm9]

  Description:
    The Generic Read/Write Request commmand provides a pass through to the Read/Write
    subsystem.  The command parameters are passed to the Read/Write subsystem without
    being interpreted.

  Input Parameters:

    0 - Generic Read/Write Request Parameter 0.
    
          Type:    Unsigned 32-bit value
    
          Range:   0 to 0xffffffff
    
          Default: 0
    
    1 - Generic Read/Write Request Parameter 1.
    
          Type:    Unsigned 32-bit value
    
          Range:   0 to 0xffffffff
    
          Default: 0
    
    2 - Generic Read/Write Request Parameter 2.
    
          Type:    Unsigned 32-bit value
    
          Range:   0 to 0xffffffff
    
          Default: 0
    
    3 - Generic Read/Write Request Parameter 3.
    
          Type:    Unsigned 32-bit value
    
          Range:   0 to 0xffffffff
    
          Default: 0
    
    4 - Generic Read/Write Request Parameter 4.
    
          Type:    Unsigned 32-bit value
    
          Range:   0 to 0xffffffff
    
          Default: 0
    
    5 - Generic Read/Write Request Parameter 5.
    
          Type:    Unsigned 32-bit value
    
          Range:   0 to 0xffffffff
    
          Default: 0
    
    6 - Generic Read/Write Request Parameter 6.
    
          Type:    Unsigned 32-bit value
    
          Range:   0 to 0xffffffff
    
          Default: 0
    
    7 - Generic Read/Write Request Parameter 7.
    
          Type:    Unsigned 32-bit value
    
          Range:   0 to 0xffffffff
    
          Default: 0
    
    8 - Generic Read/Write Request Parameter 8.
    
          Type:    Unsigned 32-bit value
    
          Range:   0 to 0xffffffff
    
          Default: 0
    
    9 - Generic Read/Write Request Parameter 9.
    
          Type:    Unsigned 32-bit value
    
          Range:   0 to 0xffffffff
    
          Default: 0
    
  Output Data:

    If an error occurred, the following information will be displayed.
    
          "DiagError aaaaaaaa"
    
       where
    
          aaaaaaaa is the Diagnostic Error Code
    
  Revision History:

    0001.0000   Initial revision.
    0011.0000   Combined the PSG Diagnostic Error Codes (PSGDEC) and the Diagnostic External
                Test Service Error Codes (DETSEC) into a single set of Diagnostic Error Codes
                (DiagError).